FingerTech 3lb Beater Bar Assembly

• Sized for the 3lb "Beetleweight" class
• Beater Length: 106.7mm (4.2in)
• 30T pulley with Delrin flanges adds 16.7mm (.657in) to length. Total 123.4mm (4.86in).
• Beater Height: 50.8mm (2.0in)
• Beater Thickness: 19.05mm (0.75in)
• Beater Material: 6061-T6 Aluminum
• Beater Weight: 149grams (5.26oz)
• The bar has 4 holes each side for 5/16-18 screw "teeth".
• Installed teeth add 12.7mm (0.5in) to height. Total 63.5mm (2.5in)
• Max outside frame width should be 152mm (6in) or less. Frame material thickness of 9.53mm-12.7mm (0.375in-0.5in) works well.

• 1 - 3lb Beater Bar
• 1 - 30T S3M pulley (flanged with no hub) with thick outer Delrin Flange
• 2 - Countersunk 8-32 x 1in screws
• 8 - "Teeth" 5/16-18 x 0.75in countersunk black oxide screws plus lock washers (Thread-lock is recommended.)
• 1 - 5/16-24 x 6.5in Gr8 Hex bolt and Nylock Nut "dead shaft"
• 2 - SCE55 5/16in roller bearings
• 1 - 3/32 hex wrench for installing pulley
• 1 - 3/16 hex wrench for installing teeth

As with anything related to combat robots, it is potentially dangerous to add a spinning weapon to a robot. Never power up the robot outside of a safety enclosure. Always use a safety lock and follow proper activation procedure. Visit our Safety Information page for more information.

Beater_Bar_Assy.IGS

Beater_Bar_Assy.STEP